摆闸简介
摆闸，在轨道交通行业一般称为拍拍门，其阻拦体(闸摆)的形状是具有必定面积的平面，垂直于地上，经过旋转摇摆完成阻拦和放行。阻拦体的原料常用不锈钢、有机玻璃、钢化玻璃，有的还选用金属板外包特殊的柔性资料(削减碰击行人的损伤)。 中文名摆闸外文名swing gate材 质304不锈钢或许316通道宽单机小于或等于900MM通行方法双向(感应开、感应关)摆臂传动视点180度 Sluice sluice Swing gate, commonly known as slap gate in the rail transit industry, the shape of its blocking body (swing) is a plane with a certain area, vertical to the ground, through rotating swing to complete the blocking and release. Stainless steel, plexiglass and toughened glass are often used as the raw materials of the barrier, and some special flexible materials are also used to wrap metal plates (to reduce the damage of pedestrians). Swing gate material 304 stainless steel or 316 channel width single machine is less than or equal to 900MM traveling method bi-directional (induction on, induction off) swing arm drive viewpoint 180 degrees 摆闸 智能摆闸
桥式智能摆闸
由刚开始的外形桥形结构沿用至今的较为浅显的称号，由主机箱和两个活动摆杆组成，摆杆可做180°或90°摇摆，以到达劝止或放行的目的。
柱式摆闸
主设备外形以立柱的方法呈现，可做到和桥式摆闸相同的功用，特色是本钱较低，占用空间较少等。
效果及构件
首要用于通道出入口办理,通常的应用场所只允许人员经过，或拖带行李的人员，及残障人员通行。考虑到摆闸较于翼闸可做到更宽的通道特性。大部份摆闸通道可稠浊行人、自行车，助力车、残障车等一些非机动交通工具通行。
摆闸通用功用
1)摆闸故障自检和报警提示功用，便利用户保护及使用;
2)摆闸经过主控板上的内置小按盘，可编程设备的运转状况;
3)摆闸机械结构、感应双重防夹功用，在摆臂复位的过程中遇阻时，主动中止或在默许的时刻内电机中止作业，默许延时后再次复位(直到复位为止)，且力度很小(≤2Kg);
4)摆闸声、光报警功用：含不合法闯入、跟随报警;
5)摆闸防冲功用，在没有接纳到开闸信号时，摆臂主动锁死;
6)摆闸摆杆(臂)同步功用;
7)摆闸主动复位功用，开闸后，在规则的时刻内未通行时，体系将主动撤销用户的此次通行的权限，规范为翻开后5秒主动复位;
8)摆闸断电后通道主动翻开，上电主动闭合;
9) 摆闸可与多种读卡设备相挂接，接纳继电器开关信号作业;
10)摆闸可单向或双向操控人员进出;
11)摆闸可直接经过办理计算机完成长途操控与办理;
Intelligent bridge swing gate
It consists of the main box and two movable swing bars. The swing bars can swing 180 or 90 degrees to achieve the purpose of dissuasion or release.
Column sluice
The shape of the main equipment is presented by the column method, which can achieve the same function as the bridge swing brake, featuring lower cost and less space occupation.
Effects and components
Mainly used for the passageway entrance and exit processing, usually the application site only allows people to pass through, or carry luggage, and disabled people to pass. Considering that the sluice can achieve wider channel characteristics than wing gates. Most of the swing gates can be used by thick pedestrians, bicycles, boosters, disabled vehicles and other non-motor vehicles.
Universal function
1) self checking and alarm prompting function to facilitate user protection and use.
2) the operation status of programmable device through the built-in small pad on the main control board.
3) Mechanical structure and induction double anti-clamping function. When the swing arm is blocked in the process of resetting, the motor stops working actively or at the tacit moment, and resets again after tacit delay (until resetting), and the force is very small (<2Kg);
4) sound and light alarm function: illegal intrusion, following alarm.
5) anti impact function, when the signal is not received, the swing arm is actively locked.
6) swing lever (ARM) synchronous function;
7) Active reset function, the system will actively revoke the user's permission to reset 5 seconds after the switch is opened, if it does not pass within the regular time.
8) after the power failure, the channel will turn on and turn on.
9) it can be linked to a variety of card reader devices to receive relay switch signals.
10) one way or two way manipulation of people in and out.
11) can be directly processed by computers to complete long-distance control and processing.
摆闸扩展功用：
1)摆闸计数、警报功用;
2)摆闸机箱加长，摆杆(摆臂)资料挑选;
3)摆闸广告位灯箱挑选。
摆闸技术参数
摆闸外形尺寸：
桥式摆闸1550mm×2800mm×960mm
柱式摆闸：直径168mm*1000mm
摆闸读写方法：ID卡、IC卡、磁卡、条码仪等
摆闸分量：桥式60-70Kg，柱式35-40kg
摆臂长：300mm-650mm
摆臂最大承受力：30Kg
摆闸作业电压：AV220V±10V，50Hz
摆闸电机功率：24V 30W
摆闸摆门时刻：0.2秒
摆闸输入接口：+12V电平信号或脉宽信号≥100ms的DC12V，脉冲信号驱动电流≥10mA
摆闸通讯接口：RS485规范通讯间隔≤1200米
摆闸通行速度：40人/分钟(常开)，25-30人/分钟(常闭)
摆闸闸门开、关时刻：1-2秒
摆闸作业环境：室内、室外(阴棚)
摆闸温度：-10℃—— 50℃ 相对湿度：≤90%，不凝露
摆闸首要结构和装备：
桥式摆闸：◇主机箱2个◇摆门(摆臂)2个◇操控板1套◇机械机芯及传动部分2个◇电源1个◇电机2个
柱式摆闸：◇主柱2根 ◇附柱4根◇附栏杆8根◇摆臂2个◇操控板2套◇变压器4个◇电机2个 ◇机芯及传动部分2套
摆闸的组成部份
摆闸结构组成：摆闸由机箱、机芯、摆臂、操控体系、红外传感器、操控设备等部分组成。
高级制动摆闸组成：机箱，制动机芯，操控体系，红外传感器，操控设备等部份组成(高级制动摆闸的优点是，能快速平稳停机，不存在晃动，不会呈现机械卡死结构，掉电后摆臂主动翻开。完全符合消防要求)
摆闸的功用特色
摆闸产品功用特色：
1)具有故障自检和报警提示功用，便利用户保护及使用;
2) 经过主控板上的内置小按盘，可在线编程设备的运转状况;
3) 防碰伤功用，在摆臂复位的过程中遇阻时，在规则的时刻内电机主动中止工
作，且力度很小;
4)防冲功用，在没有接纳到开闸信号时，摆臂主动锁死;
5)摆臂同步可调(针对双摆情况);
6)具有主动复位功用，开闸后，在规则的时刻内未通行时，体系将主动撤销用户
的此次通行的权限;
7)断电常开，以满足消防办理的要求;
8)可与多种读卡设备相挂接，接纳继电器开关信号作业;
9)双向摆，单、双向操控人员进出;
10)可直接经过办理计算机完成长途操控与办理;
11)延时主动复位，规范为翻开后5秒主动复位;
摆闸可扩展功用：
1)声、光报警功用，含不合法闯入报警，防夹报警等;
2)计数功用;
3)红外复位功用;
4)机箱加长，摆臂加长等。
摆臂规范： 规范摆臂 600MM(可适当加长或缩短)
摆臂传动视点：180 度
摆闸摇摆方向： 单向或双向
摆闸机箱资料： 规范 304 号不锈钢或定制316号不锈钢
摆闸电源电压： AC220±10% V,50HZ
摆闸驱动电机： 直流无刷电机 140W/24V(或有刷电机)
摆闸电机转速： 1600 转/分(规范)
摆闸输入接口： 继电器开关信号或 12V电平信号或脉宽>100ms 的 12V脉冲信号，
摆闸驱动电流>1 0 m A
摆闸通讯接口： RS485 规范
摆闸通讯间隔： 1200 米
摆闸LED指示灯： 2个或许4个
摆闸读 卡 窗： 2 个
摆闸通行速度： 40 人/分钟(常开) ，25-30 人/分钟(常闭)
摆闸闸门开、关时刻： 1-2秒
摆闸上电后进入通行状况所需时刻： 3秒
摆闸呈现故障后的主动复位时刻： 10秒
摆闸作业环境：室内、室外
摆闸温 度：-40℃——80 ℃
摆闸湿 度：5%—— 90%
Expansion function:
1) count and alarm function;
2) chassis lengthening and swing rod (swing arm) data selection;
3) selection of advertising light boxes.
technical parameter
Outline size:
Bridge swing gate 1550mm * 2800mm * 960mm
Column swing gate: diameter 168mm*1000mm
Read and write methods: ID card, IC card, magnetic card, bar code instrument, etc.
Component: bridge type 60-70Kg, column 35-40kg
Swing arm length: 300mm-650mm
Maximum bearing capacity of swing arm: 30Kg
Working voltage: AV220V + 10V, 50Hz
Motor power: 24V 30W
Swing door time: 0.2 seconds.
Input interface: +12V level signal or pulse width signal greater than 100ms DC12V, pulse signal drive current greater than 10mA
Communication interface: RS485 specification, communication interval is less than 1200 meters.
Speed: 40 person / minute (Chang Kai), 25-30 person / minute (Chang Bi)
Gate opening and closing time: 1-2 seconds
Working environment: indoor and outdoor (shade shed)
Temperature: -10 C - 50 C relative humidity: less than 90%, no condensation.
Primary structure and equipment:
Bridge type swing brake: _main box 2_swing door (swing arm) 2_control board 1 set_mechanical movement and transmission part 2_power supply 1_motor 2
Column swing brake: _2 main poles_4 attached poles_8 attached railings_swing arm 2 control board 2 sets_transformer 4_motor 2_movement and transmission part 2 sets
Components of floodgate
The swing brake structure consists of a chassis, a movement, a swing arm, a control system, an infrared sensor, a control equipment and other parts.
Advanced brake pendulum brake consists of chassis, brake movement, control system, infrared sensors, control equipment and other parts (Advanced brake pendulum brake has the advantage of fast and smooth shutdown, no shaking, no mechanical stuck structure, swing arm actively open after power failure. Fully comply with fire requirements)
Features of swing gate function
Product features:
1) self checking and alarm prompting function to facilitate user protection and use.
2) through the built-in small pad on the main control board, the operation status of the equipment can be programmed online.
3) Anti-collision function, when the swing arm is blocked in the process of resetting, the motor stops working actively in regular time
And the intensity is very small.
4) anti impact function, when the signal is not received, the swing arm is actively locked.
5) adjustable swing arm (for double pendulum).
6) Possessing the function of active reset, the system will revoke the user actively when the switch is opened and the user is not in the normal time.
The current jurisdiction;
7) cut off electricity frequently to meet the requirements of fire control.
8) it can be linked to a variety of card reader devices to receive relay switch signals.
9) two way swing, one way or two way to control people in and out.
10) can be directly processed by computers to complete long-distance control and processing.
11) delayed active reset, and standard reset after 5 seconds.
Extensible functions:
1) sound and light alarm function, including illegal entry alarm, anti clip alarm, etc.
2) counting function;
3) infrared reset function;
4) chassis lengthening and swing arm lengthening.
Swing arm specification: Standard swing arm 600MM (properly lengthened or shortened).
Swing arm transmission viewpoint: 180 degrees
Swinging direction: one way or two way.
Chassis information: Specification No. 304 stainless steel or custom No. 316 stainless steel.
Supply voltage: AC220 + 10% V, 50HZ
Drive motor: DC brushless motor 140W/24V (or brush motor)
Motor speed: 1600 R / min (specification)
Input interface: relay switch signal or 12V level signal or pulse width >100ms 12V pulse signal.
Driving current >1 0 m A
Communication interface: RS485 specification
Communication interval: 1200 meters
LED indicator: 2 or 4.
Card reading window: 2
Speed: 40 person / minute (Chang Kai), 25-30 person / minute (Chang Bi)
Gate opening and closing time: 1-2 seconds
The time required to enter the traffic condition after power up is 3 seconds.
Active reset time after failure: 10 seconds.
Working environment: indoor and outdoor
Temperature: -40 C - 80 C
Humidity: 5% - 90%
摆闸应用领域
Application areas
摆闸：立式圆角摆闸、桥式梯形摆闸、桥式梯形摆闸、桥式斜面摆闸、桥式圆角摆闸、双机芯摆闸、鸭嘴摆闸，门禁通道办理体系：首要用于企业，单位，会所，宾馆，工厂，图书馆，小区，校园等场合
翼闸：桥式八角斜面翼闸、桥式船形翼闸、桥式梯形翼闸、双机芯翼闸，旅游景点售票办理体系：首要用于旅游景点，公园等场合
三辊闸：蝶形三辊闸、立式圆角三辊闸、桥式八角三闸辊、桥式八角斜面三辊闸、桥式梯形三辊闸、桥式圆角三辊闸、双立柱三辊闸，影剧院售票检票办理体系：首要用于电影院，夜总会，俱乐部，KTV等娱乐场合
智能通道办理体系：摆闸、三辊闸、翼闸类型展馆售检票办理体系：首要用于展馆，体育馆，交流中心，交易中心等场所
Swing gate: vertical circular swing gate, bridge trapezoidal swing gate, bridge trapezoidal swing gate, bridge inclined swing gate, bridge circular swing gate, double-action swing gate, duck mouth swing gate, access control channel management system: mainly used in enterprises, units, clubs, hotels, factories, libraries, residential areas, campuses and other occasions
Wing lock: bridge octagonal inclined wing lock, bridge ship-shaped wing lock, bridge trapezoidal wing lock, double-core wing lock, ticket management system of tourist attractions: mainly used in tourist attractions, parks and other occasions
Three-roll gate: butterfly-shaped three-roll gate, vertical rounded three-roll gate, bridge-type octagonal three-roll gate, bridge-type octagonal inclined three-roll gate, bridge-type trapezoidal three-roll gate, bridge-type rounded three-roll gate, double-column three-roll gate, theater ticket processing system: primarily used in cinemas, nightclubs, KTV and other entertainment occasions
Intelligent channel management system: swing gate, three roll gate, wing gate type exhibition hall ticket management system: mainly used in exhibition hall, gymnasium, exchange center, trading center and other places